Project handbook
The handbook contains details of how projects work at BITS Hyderabad and how to find one worth doing. The rules here come from the BITS Academic Regulations and AUGSD Hyderabad’s mails on pre-registration of project courses and the new UROP scheme. They change from time to time, so check with AUGSD or your department before you register.
Formal and informal projects
- Formal: registered as a course, either a Study, Laboratory, Design or Special Project, or, from 2026–27, a UROP course (see below). It carries 3 units, gets a letter grade that counts in your CGPA, and fills one of your elective slots.
- Informal: you work with a professor without registering. There are no units and no grade, and it doesn’t appear on your transcript.
- Either way, the professor may guide you directly or hand guidance to a PhD scholar or a senior student.
Why do an informal project?
- Try out a professor, a lab or a field before you spend a graded course on it.
- There’s no grade, so no risk to your CGPA, and it doesn’t use up one of your limited project courses.
- You can start any time: in your first year, over a summer, or in a semester when your timetable is already full.
- It can turn into a formal project later, or lead to a paper or a recommendation letter.
- It could be a way to find out whether you enjoy research or application-oriented projects.
SOP, LOP, DOP and Special Project
Besides the new UROP courses (see below), formal projects come in four kinds. Each department offers them under its own course code, for example CS F266 or EEE F376, and the project bank on the Projects page lists each project’s type.
The work is not strictly bound to the type of project; sometimes there is almost no difference. You might end up going to a laboratory for a study project, or doing a literature survey for a laboratory project. Don’t take the formal definitions too seriously; it is best to talk to the professor about the nature of the project.
- SOP, Study Project: reading and reviewing the literature on a topic, usually ending in a report. Often a first project.
- LOP, Laboratory Project: hands-on work in a lab, such as experiments, measurements and data. You often work alongside a PhD scholar.
- DOP, Design Project: designing and building something: a device, a model, a simulation or an algorithm.
- Special Project: like a Study Project but deeper, aimed at students heading towards higher studies in that area.
UROP and Super UROP
From 2026–27, BITS has added research courses under the Undergraduate Research Opportunities Program (UROP), approved by the Senate on 9 July 2026. Each course carries 3 units and is separate from the project courses above. It’s up to you whether to register for a project course or a UROP course.
The three levels
- Basic UROP (one semester): for students starting out in research, from the first semester of second year. The courses are UROP F200 and F201 (Basic Research Project 1 and 2), and you can take up to 2. To get a valid grade you also need the completion certificate of an online course on Basic Research Methodology (about 10 hours); without it you get “RC”. The expected output is progress reports, presentations or small-scale results.
- Advanced UROP (two semesters): from third year, after a Basic UROP. The courses are UROP F300 to F303, and you can take up to 4 (two Advanced UROPs). You stay with the same guide and co-guide for two consecutive semesters, get “AC” (allowed to continue) after the first, and both courses are graded at the end of the second. Instead of the second course, you can go on to a 16–20 unit thesis under the same guide and co-guide. Each Advanced UROP completed with at least a B in the project courses comes with a stipend of Rs 30,000.
- Super UROP (three semesters): for senior students aiming at high-level research, from third year, after a Basic UROP. The courses are UROP F400 to F402, and you can take up to 3 (one Super UROP). You stay with the same guide and co-guide for three consecutive semesters, get “AC” after each of the first two, and all three courses are graded at the end. Instead of the third course, you can go on to a 16–20 unit thesis under the same guide and co-guide. It comes with a stipend of Rs 50,000, with at least a B in the project courses. A Super UROP combined with a 16–20 unit thesis earns the mention “with research” on your degree certificate.
In an Advanced or Super UROP, you are expected to present your work at a reputed conference, publish it in a reputed journal or file a patent. In a Super UROP, a lower grade (B or below) may be given if this isn’t met. The scheme also proposes letting Advanced UROP students upgrade to a Super UROP during their second semester.
If you stop early, the completed work may still count: one semester of an Advanced UROP as a Basic UROP, and one or two semesters of a Super UROP as a Basic or an Advanced UROP. Withdrawing from a Super UROP gives “W” for all the courses you registered for in it.
General rules
- You can have up to two mentors, a guide and a co-guide.
- Up to 3 UROP courses can count as discipline electives, or up to 3 as open electives, and at most 5 towards your degree in total.
- Only one UROP course in a semester, under a different course number each time.
- The instructor-in-charge is the Associate Dean, AUGSD. Evaluation follows the existing project courses, and the final evaluation form is signed by your guides and the examiners.
- You may be offered funding from your guide’s or co-guide’s funded project, as per Institute guidelines.
- Each semester, AUGSD holds Undergraduate Research Symposia, where students doing a UROP or a thesis must present their work.
- Each year, the top 10% of projects in each department get a cash award of Rs 25,000 and a certificate from the HoD, and outstanding projects are featured on the Institute website and research newsletter.
Which batches it applies to
- Admitted in 2025–26: all three levels, from the first semester of 2026–27.
- Admitted in or before 2024–25: Advanced and Super UROP. A project course you’ve already completed (Study, Laboratory, Design or Special) counts as your Basic UROP.
Who can take a formal project
- First year: you can’t register for a project course yet. Informal projects are still open to you.
- Second year: one Basic UROP in the first semester, and one Study Project or Basic UROP in the second semester.
- Third year: one project course each semester: a Study, Laboratory, Design or Special Project, or a UROP.
- Fourth year (single and dual degree): two different project courses each semester.
- A Special Project needs all your discipline core courses completed first.
- An Advanced or Super UROP needs a Basic UROP first (see UROP above).
Limits
- Up to 3 project courses can count towards your discipline electives. Among them there can be at most one Study Project, two Laboratory Projects, two Design Projects and one Special Project.
- Up to 3 project courses, of any kind and from any discipline, can count as open electives.
- No more than 5 project courses, including UROP courses, across all your elective slots.
- Over your whole degree, whatever the discipline, you can take at most one Study Project, two Laboratory Projects and two Design Projects.
- Never two of the same kind in one semester, even from different disciplines, and never two under the same professor in one semester.
- Laboratory and Design Projects each have two course numbers. Once you have a grade in one, you can’t register for it again, but you can take the other.
- You can’t take a project course alongside a 9-unit First Degree Thesis.
- The Study Project offered by Humanities and Social Sciences counts as a humanities elective.
A project in another department
Discipline electives mostly have to come from your own discipline, so a project course you take in another department normally counts as an open elective. It can count as a discipline elective only if your department specifies the other discipline as allied to yours.
You can also register for your own department’s project course with a professor from another department as your guide. Your application then needs one more approval, from the Head of the Department offering the course.
A UROP course counts as a discipline elective only if your guide or co-guide is from your discipline; otherwise it counts as an open elective.
Approaching a professor
- Start early. Approach professors well before pre-registration. Each professor can guide only a limited number of students, and popular professors fill their slots quickly.
- Do your homework. Read the project bank, the professor’s faculty page, their research papers and work on Google Scholar, and their reviews here. Approach them only if you meet the prerequisites listed for the project, such as a minimum CGPA or particular courses.
- Write a short email. Say who you are (ID, branch, year) and which project or area interests you and why. Mention some of their research papers or work that you find interesting, and the courses or skills you bring.
- Follow up once. If there’s no reply, send one polite reminder after 2–3 days or visit them in their chamber during their free hours.
- Ask before you commit. Who will guide you day to day, how often you’ll meet and what you’re expected to produce. For a formal project, apply for pre-registration only once the professor has agreed to take you.
How does pre-registration work?
You register for a formal project twice: once in the semester before, and again when the semester of the project begins. For a project in the second semester, for example, you pre-register during the first. For the second semester of 2026–27, pre-registration for both project courses and UROP courses closes on 30 November 2026 at 5 PM.
For a project course (Study, Laboratory, Design or Special):
- Watch for the AUGSD mail. Pre-registration opens towards the end of the semester, usually before the comprehensive exams. AUGSD announces it by email with a deadline and that semester’s project bank.
- Get the professor’s consent first. Agree on the project with the professor before you apply.
- Apply in ERP. Go to Self Service, then Student Pre-Registration, then Project Course Pre Registration. Choose the project course, enter the project title, pick your professor under “Instructor Name”, and submit. If your professor is from another department, pick them under “Other Dept Instructor Name” instead.
- Wait for approval. The professor has to approve your application. You get an email when you apply and whenever its status changes, and you can check the status in ERP.
- Register again when the semester starts. During course registration, an approved project can be registered like any other course. The instructor-in-charge shown for the course may not be the professor you applied under. That’s completely normal.
For a UROP course:
- Get your guide’s consent. Agree on the UROP with the guide, and co-guide if you have one, before you apply.
- Apply on paper, not in ERP. Collect the prescribed form from the AUGSD office, get it signed by your guide and co-guide, and submit it to the AUGSD office before the deadline.
- AUGSD assigns the course. A UROP is assigned at the start of its first semester. For an Advanced or Super UROP, AUGSD also assigns each later semester’s course, or the thesis.
Documents from AUGSD
These stay much the same from year to year. You need to be signed in to open them.
Sources
The BITS Pilani Academic Regulations (2023), AUGSD Hyderabad’s mails on pre-registration of project type courses (April and November 2026), and the UROP and Super UROP scheme approved by the Senate on 9 July 2026. Consult your department, AUGSD and/or the professor under whom you want to pursue a project in case you have any queries.